HT Icom IC-T70A Dual Band

HT Icom IC-T70A Dual Band

Rp 2.600.000

Specifications

General

Frequency range (unit: MHz)
Tx
Rx

144-148, 420-450*¹
136-174, 400-479*¹
*¹guaranteed 144-148 MHz, 440-450 MHz

Type of emissions

F2D/F3E (FM)

Number of memory ch.

302 (incl. 50 scan edges and 2 call)

Antenna impedance

50 Ω (SMA)

Power supply
External DC power
Battery cells

7.2V DC (with BP-264)
10-16V DC
6-10V DC

Frequency stability

±2.5 ppm -20°C to +60°C basis of 25°C

Current drain
(at 7.2V DC or 13.5V DC)
(VHF/UHF, typical)

Tx
Rx

High (UHF/VHF)
Max. audio

Stand-by
Power saved

1.7 A/2.1 A typical
Less than 450mA (internal SP, 16Ω)
Less than 300mA (External Sp, 8Ω)
Less than 90mA
Less than 40mA (1:8 duty)

Operating temperature range

-20°C to +60°C
-4°F to +140°F

Dimensions
(projections not included)

58(W) × 111(H) × 30(D) mm
2⁹⁄₃₂(W) × 4³⁄₈(H) × 1³⁄₁₆(D) in

Weight

380g; 13.4oz (with BP-264 and Ant.)

Transmitter
Output power (at 7.2 V DC)	5.0W/2.5W/0.5W (high/mid/low)
Spurious emissions	Less than -60 dBc (high/mid) Less than -13dBm (low)
Max. freq. deviation	±5 kHz/±2.5 kHz (wide/narrow)
Ext. MIC connector	3-conductor 2.5(d) mm (¹⁄₁₀″)/2.2k?

Receiver
Sensitivity (at 12dB SINAD)	0.18 µV (guaranteed range)
Squelch sensitivity (at threshold)	0.18 µV typical
Selectivity FM FM narrow	More than 60dB Less than 60dB
Spurious and Image rejection ratio	More than 60dB (VHF)
Audio output power (at 10% distortion)	More than 700mW (internal SP, 16Ω More than 400mQ (external SP, 8Ω
Ext. SP connector	3-connector 3.5 (d) mm (¹⁄₈″)/8Ω